Triple Part Multi Purpose Ladders having the usage possibility without being leaned against any place at “A” position enable users to reach higher places by using retractable part. Due to the joint system between wings, it is possible to use them as Leaning Ladders by changing them into Triple Part Ladders.
The expansion is fixed with strong straps, and the slip risk is eliminated with rubber foot caps. Swinging is prevented with the use of foots extended to sides. The system of retraction, step locking and joint is very strong and safe. They can be used as separate two ladders by removing retractable part when required. These ladders are practical and light because of their aluminum construction and they can be used in various areas. |
|
|
Triple Part Multi Purpose Ladders
Code |
Rungs |
|
Height at A Type Position (m.)
|
Overall A Type Height (m.) * |
Height at Straight Position (m.) |
Overall Straight Position Height(m.)* |
Weight
(kg.) |
Size
(axbxh-cm.) |
TS6160 |
3x6 |
2 |
3,2 |
4,2 |
4,4 |
5,4 |
12 |
48x16,0x200 |
TS175 |
3x8 |
2,5 |
4,3 |
5,3 |
6,1 |
7,1 |
16 |
48x18,5x250 |
TS190 |
3x9 |
3 |
5,0 |
6,0 |
7,1 |
8,1 |
19 |
48x18,5x300 |
TS205 |
3x11 |
3,5 |
5,9 |
6,9 |
8,3 |
9,3 |
20 |
48x18,5x350 |
TS220 |
3x13 |
4 |
6,7 |
7,7 |
10 |
11 |
22 |
48x18,5x400 |
| * Average safe height with user. |
TECHNICAL DETAILS
- Hardness of the Aluminum: 65 Brinel
- Beam Dimensions:75x25 mm.
- Rung Dimensions: 30x30 mm.
- Square Rung Profile
- Maximum Load Capacity: 150 Kg.
- Connection Equipments :
Bolt and Galvanized Plate |
|
)
)
